Skyvision AI Pro

• 5” Color Touch Screen with 7 Hrs+ Battery life
• Revolutionary AI Features: Utilize the latest AI monitoring technology, including Covered Face/Roll Over Alert, Advanced Sleep Analytics, Baby Eye Wellness Tracker, and Precious Baby Moments 
• Patented Dual Mode Technology for Double Safety and Convenience: Use the large 5-inch touch screen parent unit for easy viewing in non-Wi-Fi mode (perfect for babysitters or grandparents), and simultaneously access the live stream via Wi-Fi mode securely on your smart device using the encrypted HubbleClub app to help prevent hacking 
• Stay Connected Day or Night: HD Camera offers crystal-clear images of your baby day or night with Infrared Night Vision for exceptional clarity even in the darkest hours 
• Security is Non-Negotiable: Our secure Hubble cloud and app platform is ISO27001:2013 and ISO27017:2015 certified and GDPR compliant with servers in the United States 
• A Good Night Sleep for Everyone: Sleep Trainer helps you create personalized bedtime and wake-up routines by using the built-in speaker, preloaded soothing sounds, and 7-color night light to help everyone in the house establish healthy sleep habits and get more sleep 
• Dual Mounting Options: Install with included crib mount for the optimal view above your baby, or use the Flexible Desk Mount to monitor another location and when your family is on the go 
• Rest Assured, Baby is Safe: Receive real-time notifications about your baby’s comfort, including abnormal movement, cry detection, and room temperature

The SkyVision AI Pro package includes:

• 1 baby unit with adjustable crib mount
• 1 touchscreen parent unit
• 2 power adapters
• 1 flexible desk mount
• Quick Start Guide

Thread the USB cable through the crib mount’s channels, tighten the base nut, and secure it to the crib. The camera supports both adjustable crib and desk mounts.

The camera comes with a flexible desk mount. Here are the steps for fixing the flexible desk mount on the wall: 

• Mark the position of the screw holes on the wall. 
• Install wall anchors (not provided) suitable for the wall type and mounting screws if needed. 
• Fasten the mounting screws (not provided) on the wall. 
• Position the cable behind the base as shown in the picture before attaching the base on the wall. 

Ensure the finest viewing experience with the included crib mount featuring a cable management  system. This mount is designed to attach directly to most crib top rails. Follow these instructions to assemble and install the crib mount:

Assembling the Crib Mount – Lower Tube Assembly:

• Thread the power cord through the lower tube.
• Loosen the base nut and insert the lower tube’s end into the base, ensuring it is fully seated.
• Tighten the base nut securely. Refer to Fig. 1 & Fig. 2 for guidance.

Connecting Tubes:

• Thread the power cord through the connector and plug it into the lower tube until you hear a “Click” sound. Refer to Fig. 3 & Fig. 4.

Middle Tube Assembly:

• Thread the power cord through the middle tube.
• Insert the middle tube into the lower tube connector until a “Click” sound confirms the connection. Refer to Fig. 5.
• Thread the power cord through the connector and insert it into the upper end of the middle tube, securing with a “Click” sound. Refer to Fig. 6.

Elbow Tube and Camera Tube:

• Thread the power cord through the elbow tube.
• Insert the elbow tube into the upper tube connector until you hear a “Click” sound. Refer to Fig. 7.
• Thread the power cord through the camera tube with the power cord slot facing upward.
• Insert the camera tube into the connector, securing with a “Click” sound. Refer to Fig. 8 & Fig. 9.

Locking the Lid:

• Place the tab end into the lower open section of the elbow.
• Rotate the lid down into the elbow tube, pressing until you hear a “Click” to ensure a secure fit. Refer to Fig. 10 & Fig. 11.

Camera Locking:

• Press the lock nut over the ball and attach the camera to it.
• Tighten the lock nut securely to hold the camera in place. Refer to Fig. 12 & Fig. 13.

Power Connection:

• Insert the DC plug into the camera’s power socket. Refer to Fig. 14 & Fig. 15.
• Any excess cable should be pushed back into the open slot.

Mounting the Crib Mount:

• Place the crib mount base on the upper rail.
• Tighten the lock nut to securely mount the crib mount in a straight position. Refer to Fig. 16 & Fig. 17.

Alternate Mounting Method for Wider Crib Widths:

In case your crib’s rail width is too wide to accommodate the crib mount, please follow the alternate mounting method as shown below:

• Unscrew the lock nut from the base.
• Place the base in between the rails/bars of the crib from the outside. Your placement must be in such a way that the camera’s field of view completely covers the crib, Refer to Fig. 18.
• Fasten the lock nut from the inside till it has been secured firmly in place as shown, Refer to Fig. 19 & Fig. 20.

Powering On:

• Insert the DC plug into the power socket at the bottom of the crib mount. Refer to Fig. 21.
• Connect the power adaptor to a suitable power outlet.

Cable Management Covers:

Determine the number of cable management sections are needed to cover the cable from the Crib Mount to below the bottom rail.

• Snap the needed sections together and insert the cable into the center of the cover.
• Peel the backing tape off the cable covers.
• Align the flat of the top sections with the bottom of the crib mount and press to rail to secure the sections. Refer to Fig. 22.

IMPORTANT SAFETY NOTES:

WARNING: Choking Hazard – Contains Small Parts. Keep children under 5 away from the installation area.

WARNING: Strangulation Hazard: The cable covers MUST be installed and be even with or extend below the bottom of the crib rails before use.

Setting Up Viewing:

• Power on the camera unit to view the crib image on the parent unit.
• Loosen the lock nut, adjust the camera unit, and choose the preferred zoom level on the parent unit (1x, 1.2x, 1.5x, or 2x).
• Tighten the lock nut securely to maintain the desired view. Refer to Fig. 23. 

WARNING – Choking Hazard:

May contain Small Parts. Parents must exercise caution and keep children under 5 away from the installation.

In case your crib’s rail width is too wide to accommodate the crib mount, please follow the alternate mounting method as shown below:

• Unscrew the lock nut from the base.
• Place the base in between the rails/bars of the crib from the outside. Your placement must be in such a way that the camera’s field of view completely covers the crib, Refer to Fig. 18.
• Fasten the lock nut from the inside till it has been secured firmly in place as shown, Refer to Fig. 19 & Fig. 20.

Powering On:

• Insert the DC plug into the power socket at the bottom of the crib mount. Refer to Fig. 21.
• Connect the power adaptor to a suitable power outlet.

Cable Management Covers:

Determine the number of cable management sections are needed to cover the cable from the Crib Mount to below the bottom rail.

• Snap the needed sections together and insert the cable into the center of the cover.
• Peel the backing tape off the cable covers.
• Align the flat of the top sections with the bottom of the crib mount and press to rail to secure the sections. Refer to Fig. 22.

IMPORTANT SAFETY NOTES:

WARNING: Choking Hazard – Contains Small Parts. Keep children under 5 away from the installation area.

WARNING: Strangulation Hazard: The cable covers MUST be installed and be even with or extend below the bottom of the crib rails before use.

Setting Up Viewing:

• Power on the camera unit to view the crib image on the parent unit.
• Loosen the lock nut, adjust the camera unit, and choose the preferred zoom level on the parent unit (1x, 1.2x, 1.5x, or 2x).
• Tighten the lock nut securely to maintain the desired view. Refer to Fig. 23. 

WARNING – Choking Hazard:

May contain Small Parts. Parents must exercise caution and keep children under 5 away from the installation.

The baby unit (camera) is pre-registered to your parent unit. You do not need to register it again unless the baby unit loses its link with the parent unit. To re-register your baby unit, or register a new baby unit, follow the procedure below: 

1. Swipe up at the screen bottom to pop up the menu bar. Then scroll left/right on the menu bar to see all the options and on the right down corner of the screen there is a camera icon. Tap on the camera icon and then follow the below steps.
2. Tap + and camera 1, 2, 3, or 4 will pop up. 
3. Tap 1, 2, 3, or 4 to select the desired camera, the parent unit start to search for a camera unit.  Note: camera location in dark grey color cannot be selected for a new registration. 
4. Press and hold the PAIR button on the underside of the baby unit until the parent unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear. 

The SkyVision AI Pro parent unit should hold the charge between 5-7 hours depending on the usage activity. Please make sure to fully charge the parent unit for 4 hours before using it.

In order to activate the power saving mode, please follow the steps below:

1. Tap the screen icon in the menu bar, the screen off timer options are 5 mins, 15 mins or 30 mins. 
2. Select video off after 5 mins, 15 mins or 30 mins (screen timer active when in battery mode only). 

Note: The audio is still on, you can press the power key or touch the screen to resume video feed. 

The baby unit has infra-red LEDs for picking up clear images in the dark.  

When the built-in light sensor on the front of the unit detects a low level of ambient light, the LEDs will activate automatically and the screen on the parent unit will display in black and white. The moon icon will be displayed at the top of the screen. 

You can adjust the brightness of the parent unit screen from Level 1 to Level 8.  

1. Tap the sun icon in the menu bar to adjust brightness. 
2. Select the desired brightness from level 1 ~ 8. (The default brightness is level 4.) 

In order to activate the talk-back mode, please follow the steps below:

• Toque el icono del micrófono en la barra de menú, aparecerá Presione para hablar en la pantalla.
• Tap the microphone icon to talk to your baby through the baby unit’s speaker. 
• Toque el ícono de detener para detener el talkback.  

Nota: no escuchará el sonido de la unidad del bebé si el modo de respuesta está activado.

Yes, you can pair up to 4 cameras to the parent unit and view all cameras on the same screen using a split screen option.

Note: you will hear the sound only from the main selected camera and you will need to switch between cameras if you want to hear the sound from another camera.

The unit allows playback of your personal audio to soothe your baby. Before playback record a personal audio via HubbleClub by Hubble Connected App:

1. Toque el ícono Reproducir en la barra de menú, luego aparecerá la opción de selección.  
2. Toque el ícono del micrófono para ver la grabación personal deseada. Los nombres de las grabaciones personales aparecen en la pantalla. 
3. Toque la grabación deseada para reproducir la selección y calmar a su bebé. 

The unit comes packed with entertaining content (videos, picture books games and more):

Tap the Hubble (flower) icon to access Hubble Baby entertaining games and videos. 

At HubbleClub, we understand the joys and challenges of raising a newborn. That’s why we’re excited to introduce Hubble AI — an intelligent, science-backed solution designed to keep your baby safe, healthy, and happy.

With cutting-edge technology at its core, Hubble AI acts as your virtual guardian, always alert and ready to notify you the moment your little one needs attention.

🌟 What Can Hubble AI Do for You?

1. Covered Face Detection Alerts:
Your baby’s safety is our priority. Hubble AI instantly alerts you if your baby rolls over or has their face covered, helping you act quickly to reduce sleep-related risks.

2. Sleep Insights:
Understand your baby’s sleep like never before. Hubble AI analyzes sleep duration, movements, and positions to give you a detailed view of sleep quality — day and night.

3. Baby Eye Wellness:
Eye care begins early. Hubble AI monitors your baby’s blinking patterns to identify any irregularities and ensure their developing eyes stay healthy.

4. Precious Baby Moments:
Don’t miss a single milestone. Hubble AI uses computer vision to curate adorable clips of special moments from your recordings — perfect for keepsakes and sharing.

5. Cry Detection:
Know when your baby needs you. Real-time cry alerts are sent directly to your phone, so you can respond with comfort and care immediately.

You can learn more about the AI features on our Hubble AI guidelines page: https://planfeatures.hubble.in/ai_help.html 

It is recommended for a baby for age range from 0-6 months. 

Please try to troubleshoot the issue following the steps below:

1. Ensure the camera and monitor are within 3 feet of each other. If you have multiple cameras, keep them apart or turn them off to prevent interference.
2. Reset the camera: Turn off the camera using its power switch or unplug it from power. Press and hold the PAIR button while turning the camera back on or plugging it in. Release the PAIR button when you hear a long BEEP.
3. Turn your monitor (parent unit) back on and check for normal operation.
4. If the camera remains disconnected or unresponsive, wait for the camera LED to flash red, which may take up to 1 minute after the long BEEP.
5. Once the camera LED starts flashing red, manually pair the camera to an unused camera slot using the following steps:

• Swipe up at the bottom of the screen to display the menu bar. Scroll left/right to locate the camera icon and tap on it.
• Tap the add camera icon to access the camera list.
• Use the + UP or – DOWN button to select the desired camera. The parent unit will start searching for the camera.
• Press and hold the PAIR button on the underside of the camera until the parent unit finds the camera, beeps, and displays “PAIR OK” on the screen. The camera’s video feed will then appear.
• Once successfully paired, remove the camera from the old camera slot.

• To use your video monitor baby and parent unit together, you must be able to establish a radio link between them, and the range may be affected by environmental conditions. 
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete between the baby and parent units may block the radio signal. 
• The signal strength may also be reduced by other solid structures, like walls or electrical equipment, such as radios, TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches. 
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product, so keep the baby monitor at least 1.5 meters (5 feet) from these types of products, or turn them off if they appear to be causing interference. 
• If the signal is weak, try moving the parent and/or the baby unit to different positions in the rooms. Rotating the parent unit 90 degrees may also improve signal strength. 

Please check the below points:

• The volume level in the parent unit may be set too low: increase the volume level of the parent unit.  
• The parent unit and the monitoring baby unit may be out of range with each other: try to reduce the distance between the units, but not closer than 1 meter. 

• The parent unit and the baby unit are too close to each other: please make sure the parent unit and baby unit are at least 1 meter away from each other. 
• The speaker volume of the parent unit may be set too high: please try to decrease the volume of the parent unit. 

• Make sure the night vision is set to ON or Auto position in the app. 

1. If you have a flashlight or have a flashlight on your cell phone, there is a way to reset the night vision on the camera. 
2. Take the camera into a dark room, preferably a bathroom or closet. Close the door to the room, plug the camera in and turn the lights off. 
3. Shine the flashlight directly into the camera lens for 30 to 45 seconds. After this time has passed, remove the light from the eye of the camera. Allow the camera a few seconds to readjust and then check the video on the monitor. The night vision issue should be resolved. 

Note: An alternative method to reset the infrared is to gently put your finger over the photo sensor in front of the camera for 15 seconds and then let go.  

Please make sure to download the latest version of the HubbleClub app:

• iOS app
• Android app
• Ensure the camera is positioned correctly. The mobile device should be 15-30 cm away from the camera.

• If you are using iPhone, please make sure ‘access to location’ and ‘location are’ network are authorised.
• If the camera is unable to focus, keep the mobile device steady and ensure the room is well-lit.
• Set your phone’s brightness to the optimum level. (You can readjust it after the setup is complete).
• Ensure there are no special characters in your Wi-Fi network name and password.

Follow the in-app instructions to create your Hubble account and connect to your device.

If setting up using the QR code did not work, try setting up the camera with Wi-Fi:

iOS Steps:

1. Tap on ‘Try with WiFi setup.’
2. Go to Phone Settings and select the camera SSID.
3. Return to the app to resume setup.
4. The camera should be detected.
5. Select your Wi-Fi network and enter your Wi-Fi network password.
6. Wait for the camera to complete the setup.
7. Name your device and press ‘Start Viewing the stream.’

Android Steps:

1. Tap on ‘Try with WiFi setup’ and select the detected device.
2. Wait for the device to be detected.
3. Select your Wi-Fi network and enter your Wi-Fi network password.
4. Wait for the camera to complete the setup.
5. Name your device and press ‘Start Viewing the stream.’

If the issue still persists, please reach out to our customer support team at support@hubbleconnected.com

You can check all HubbleClub features at https://www.support.hubbleconnected.com/article-categories/hubbleclub-app/

Yes, if you use iOS 12.0+ or Android 8.0+

Please upgrade your firmware. This takes around 5 minutes. We push upgrades from time to time to improve the camera features. 

The ‘Connection error’ indicates that a specific streaming method failed. In order to correct this error message, you may try the following steps: 

• Please try to refresh the camera’s list by pulling it down with your finger several times. If needed, force close the app, open it again and try to refresh the camera’s list once again. 
• Try to reboot the camera by unplugging it for 2-5 minutes and then plugging it back, leaving it plugged in and turned on for 1-2 minutes, and check the streaming again. 
• Please try to move the camera closer to the Wi-Fi router or vice versa and check if the connection error goes away. 
• Check the upload speed of the Wi-Fi® network your camera is connected to. This can be found by going to http://www.speedtest.net/. An upload speed should be at least 5 Mbps per camera.

Please note that the upload speed is very important for the camera to upload the video frames. Usually, customers only focus on the download speed of their internet. In normal home premises, the customer connects many devices to the internet and thus, the upload and download bandwidth gets distributed across all devices evenly. If the upload and download speed is in 100’s of Mbps, then connectivity issues due to upload/download bandwidth can be easily ruled out. 

• Try to change the video streaming quality to a lower number. If you set it to 1000kbps, change it t 600kbps and check the streaming again. 

There are several reasons why your camera is listed as offline: 

1. First of all, please make sure your camera is plugged in and turned ON. 
2. Make sure your camera is connected to the Wi-Fi network and the signal strength is good enough (not less than 90%). 
3. Your camera may show as offline, whereas it is not (this is the case if you still receive notifications, for instance). To see whether that is the case, you may want to try two things: 

• Refresh your camera list by pulling it down with your finger, 
• Turn the camera off and on again. Now your camera should be listed as online. 

If this does not help, please try to do a hard reset: 

• Open the HubbleClub app, go to camera settings, and tap the trash bin icon to confirm the deletion. 
• Turn off the camera by turning off the power button and wait for 1 minute. 
• Press and hold the PAIR button while turning the power button on again. 
• Continue to hold the PAIR button until you hear a long BEEP, then release the button. NOTE: If the camera does not beep, please try the above steps once again. 
• Wait for up to 30 seconds for the camera LED to start flashing red. 
• Open the HubbleClub app to add your camera again following the onscreen instructions.  

NOTE: When prompted by the app, press and hold the PAIR button again until you hear the ‘Ready for Pairing’ message, then release the button to proceed with the setup. 

If you have forgotten the HubbleClub account password, please follow the steps below:

1. Click on the “Forgot Password” link on the login screen of the mobile app. 
2. Enter the email address linked to your HubbleClub app account and submit your request. 
3. You will receive an email with a link to reset your password. Tap that link to confirm the password change. 

Please note that when you are viewing the camera stream, you will not get notifications. The app is aware that you are watching what is happening, in which case there is no need to alert you. If, however, you do not get notifications when you are not using the app, please check the below settings: 

• Have you allowed HubbleClub notifications in your phone’s settings? If not, please enable this. It is required to get motion, sound, and temperature (if supported) notifications from the app. 
• Do you have ‘Do Not Disturb’ activated, perhaps? If you enable “Do Not Disturb,” you will not get any notifications. 
• Please check the camera notification settings of your camera to ensure that motion, sound and temperature detections are activated. 

If the above did not solve your issue, please log out from the app, log back in, and check if it helped.  

The warranty is 1 (one) year from the date of purchase and 90 days for accessories. Please make sure to keep your proof of purchase.

You can reach out to our customer support team by sending an email at support@hubbleconnected.com. You can also check our website at hubbleconnected.com.

How to Obtain Warranty Service or Other Information?

If your product is not working properly, read this Quick Start Guide or the online User’s Guide of one of the models listed on page 1.

For questions, warranty, support or service related to the product, please contact us by

Email: support@hubbleconnected.com

Consumer Products and Accessories Limited Warranty (“Warranty”)

Thank you for purchasing this Hubble Connected branded product manufactured under license by Hubble Baby Care Limited (“HBC”).

What Does this Limited Warranty Cover?

Subject to the items listed below in the section “What is not Covered” HBC warrants that this Hubble connected branded product (“Product”) will be free from defects in material and workmanship under normal use for a period of 1 years from the date of purchase and that any certified accessory (“Accessory”) sold for use with this product will be free from defects in materials and workmanship under normal use for a period of 90-days from the date of purchase. This Limited Warranty is your exclusive warranty and is not transferable.

What is not covered?

This Limited Warranty excludes and does not cover:

• Normal deterioration or wear resulting from use;
• Damage caused by or resulting from misuse, abuse, or accident;
• Damage caused by or resulting from improper operation or storage;
• Damage caused by or resulting from contact with foreign substances, including, but not limited, to liquid, water, rain, humidity, perspiration, sand, dirt, and/or food;
• Damage caused by or resulting from the use of Non-Hubble Connected branded or certified Products or Accessories or other peripheral equipment.
• Damage caused by or resulting from modifications, alterations, tampering, improper installation, or repairs by someone other than Hubble connected, HBC or their authorized representatives.
• Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories; and,
• Periodic maintenance, repair and replacement of parts due to normal wear and tear.

What Other Limitations Are There?

THIS LIMITED WARRANTY SETS FORTH THE ENTIRE LIABILITY OF HBC AND CONTAINS YOUR SOLE AND EXCLUSIVE  REMEDY. OTHER THAN THIS LIMITED WARRANTY, HBC MAKES NO ADDITIONAL REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF YOUR STATE DOES NOT PERMIT THE DISCLAIMER OF WARRANTIES, THEN THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. REPAIR OR REPLACEMENT IS YOUR SOLE AND EXCLUSIVE REMEDY AGAINST HBC AND HUBBLE CONNECTED. IN NO EVENT SHALL HBC OR HUBBLE CONNECTED’s LIABILITY TO REPAIR OR REPLACE YOUR PRODUCT OR ACCESSORY EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT AND ACCESSORY AND HBC ANDHUBBLE CONNECTED’S TOTAL LIABILITY FOR DAMAGES ARISING FROM THIS LIMITED WARRANTY SHALL NOT EXCEED THE PRICE YOU PAID FOR THE PRODUCT AND ACCESSORY REGARDLESS OF WHETHER SUCH CLAIM ARISES UNDER CONTRACT, STATUTE, TORT OR OTHERWISE. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL HBC OR HUBBLE CONNECTED BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES. ALL DISCLAIMERS, LIMITATIONS OF LIABILITY AND MODIFICATIONS OF WARRANTIES STILL APPLY EVEN IF THE LIMITED REMEDY OF REPAIR AND REPLACEMENT FAILS OF ITS ESSENTIAL PURPOSE.

Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights that vary from one jurisdiction to another.

Who is covered? This Warranty extends only to the first consumer purchaser and is not transferable.

What will Hubble Baby Care Limited do?

HBC or its authorized distributor at its sole discretion will, at no charge, repair or replace any Products or Accessories that do conform to this Warranty. In the event that replacement is necessary to remedy a defect in material or workmanship, HBC may use new or re manufactured products, accessories or parts of equal quality to the original Product or Accessory.

How to Obtain Warranty Service or Other Information?

For questions, warranty, support or service related the product, please contact us by

Live Chat: hubbleconnected.com

Email: Support@hubbleconnected.com

You will receive instructions on how to ship the Products or Accessories at your expense and risk, to an HBC Authorized Repair Center.

You must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, (e) your name, address, email address and telephone number. These terms and conditions constitute the complete warranty agreement between you and HBC regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations,including representations made in any literature publications or promotional materials issued by HBC or representations made by any agent, employee or staff of HBC, that may have been made in connection with your purchase of any Product and/or Accessory.

FCC (part 15) and IC regulations

FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement.

To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported.

Industry Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)

l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102 — Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. le dispositif de a été évalué à répondre général rf exposition exigence.pour maintenir la conformité  avec les directives d’exposition du RSS-102-Radio Fréquence (RF). ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps.